Installing A Hard Disk Drive In An Internal Shelf - HP Kayak XA05 Supplementary Manual

Pc workstation upgrade and configuration guide

Hide thumbs Also See for Kayak XA05:

Table of Contents

NOTE

1 How to Install Accessories In Your Desktop PC Workstation

Installing Mass Storage Devices

Installing a Hard Disk Drive in an Internal Shelf

The internal shelves can house one hard disk drive that is up to

1.6 inches in height, and one hard disk drive of up to 1 inch in height.

1 Disconnect the computer's power cord and any LAN or

telecommunications cable.

2 Remove the computer's cover (refer to page 3).

3 Remove the four (outer) retaining screws from the top of the hard

drive unit.

4 Lift the hard drive unit partly out of the PC Workstation's case and

disconnect the data and power connectors from the existing drive.

5 Remove the hard drive unit from the PC Workstation's case.

6 Place the hard drive unit carefully on a flat surface.

Take care when handling the hard disk drive and ensure that it is

placed on an anti-static bag whenever you set it down.

English

Remove the four outer

retaining screws

Table of Contents

Kayak xa series