Traffic Log Settings - Furuno Felcom 30 Operator's Manual

4.5

Traffic log settings

(owner level only, see "Shifting to owner level" on page 5-4.)
1 In the Main window, clicking Log opens the Traffic log window, which
displays the current log mode, number of unprinted calls, and whether
logging of incoming calls is enabled/disabled.
Click Edit or
Paused: any logging is off.
Cleared: all log entries are deleted (incoming and outgoing).
Enabled: outgoing logging is on.
Enabled & Automatic printing to RS-232A: output to local printer
Enabled & Automatic printing to RS-232B: output to local printer
Scroll
Scroll down
disable logging of incoming calls. Press ENTER to select.
Circuit switched calls:
2 Clicking Cct in the Traffic log (window 1 shown in the figure below) opens the
list of all call records except MPDS calls.
Print outputs all unprinted calls (marked with a star):
Clicking Tag* marks all calls with a hash, which adds the records to the
printout file.
Clicking Tag marks the selected call with a hash, which adds the record to
the printout file.
Clicking Tag again untags a selected record.
3 Pressing
to open Logging mode window.
/ to wanted mode, and click or press ENTER to select.
to Log incoming calls and click Edit or
at a record when in window (2) displays detailed call data.
1
2
*
Call not yet printed
3
Automatic printing to RS-232A
Automatic printing to RS-232B
#
Tagged for printout
Hours:minutes:seconds
4. OPERATION FROM PC
to enable or
4-9