Ringer; Answer Beep - Furuno Felcom 30 Operator's Manual

3. HANDSET FUNCTIONS
3.3.3

Ringer

The tone sound and level heard when the phone
rings may be selected as follows.
1 Open the MENU and select Phone setup > Ringer.
2 Press
3 Press
tone.
4 Press
5 Select the Ringer function again and scroll down
to the Volume function.
6 Pressing
required sound level, and press
3.3.4

Answer beep

FELCOM 30 may be set to emit a signal in the handset when an outgoing call is
answered. The signal will also sound when a call is transferred at the remote
end.
The signal is not active during handsfree calls.
The answer beep can be turned on/off as follows.
1 Open the MENU and scroll down to Phone setup.
2 Scroll down to the Answer beep function.
3 Press
4 Pressing
3-6
to select the Tone function.
OK
again and scroll down to required
OK
to store the selected one.
OK
lists the choices. Scroll down to
OK
and scroll to On or Off, as required.
OK
stores the chosen mode.
OK
to store it.
OK
Sat. Search
››Phone setup
Set Network
Ports
Information
Keyclick
OK
››Ringer
OK
››Tone
Volume
OK ›› Tone#1
Tone#2
Tone#3
Tone#4
Tone#5
Tone#6
Tone#7
Tone#8
Tone#9
Tone
OK
››Volume
OK
›› Low
Medium
High
Increasing
Sat. Search
››Phone setup
Set Network
Ports
Information
››Active MSN
OK
Keyclick
Ringer
››Answer beep
›› On
OK
Off