SAFETY INSTRUCTIONS
WARNING
ELECTRICAL SHOCK HAZARD
Do not open the equipment.
Only qualified personnel
should work inside the
equipment.
Do not approach the radome
closer than 1 meter when
it is transmitting.
The radome emits radio waves
which can be harmful to the
human body, particularly
the eyes.
RF power density
on antenna aperture
100 w/m
2
25 w/m
2
10 w/m
2
Leave the equipment powered while
underway.
Distress cannot be communicated unless
the equipment is powered.
Important Notice
No part of this manual may be copied or reproduced without written
permission.
If this manual is lost or worn, contact your dealer about replacement.
The contents of this manual and equipment specifications are subject to
change without notice.
The example screens (or illustrations) shown in this manual may not match
the screens you see on your display. The screen you see depends on your
system configuration and equipment settings.
This manual is intended for use by native speakers of English.
FURUNO will assume no responsibility for the damage caused by improper
use or modification of the equipment or claims of loss of profit by a third party.
Please carefully read and follow the operation and maintenance procedures
set forth in this manual.
Store this manual in a convenient place for further reference.
Distance
0.35 m
0.65 m
1.00 m
WARNING
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury can
result.
Any repair work must be done by a
licensed radio technician.
Improper repair work can cause electrical
shock or fire.
Turn off the power immediately if water
leaks into the equipment or the equip-
ment is emitting smoke or fire.
Continued use of the equipment can cause
fire or electrical shock.
Do not operate the equipment with wet
hands.
Electrical shock can result.
i
Need help?
Do you have a question about the Felcom 30 and is the answer not in the manual?
Questions and answers