7.2 Alarms And Messages; 7.2.1 Introduction - Furuno Felcom 30 Operator's Manual

7. TROUBLESHOOTING

7.2 Alarms and messages

7.2.1 Introduction

ISDN Handset in idle
When idle, the ISDN Handset displays as
follows.
The alarm indicator flashes when an alarm
condition occurs.
The indicator stops once the alarm has been
read in the Display Handset by pressing
> Information > Alarms & messages".
The alarm indicator continues to be displayed if
the alarm condition persists.
The red alarm indicator on the CU flashes in
step with the alarm indicator in the display.
Clear Causes and Alarm List are cleared each
times the CU is restarted or switched ON.
The Info stores the last 50 messages.
7-4
Ocean Region
KDD
Service provider
Status Ready for call
Signal strength
Indicator
Alarm indicator
›› Sat. Search
MENU
Phone setup
Set Network
Ports
Information
›› Diagnostics
Forward Id
Version Info.
Network Info.
Alarms & Msgs
Position
Speed/ Course
›› Clear Causes
Alarms List
Info. Log
IOR