Traffic Log - Furuno Felcom 30 Operator's Manual

4.4

Traffic Log

This function logs all outgoing and incoming calls both with and without SIM card
inserted. Incoming calls may be logged as well.
Up to 100 calls can be logged.
Circuit switched calls (Cct) including:
Speech
fax
data
Packet switched data calls (Mpds) including:
Mobile Packet Data Service calls
The FELCOM 30 owner may set the log output mode as follows, (see "4.5
Traffic log settings"):
paused
cleared (stops logging and clears the log)
enabled
Traffic log readout
1 Clicking Log opens the Traffic log window.
2 The Traffic log window shows whether the logging is enabled, whether
incoming calls are logged, and the total number of unprinted calls (MPDS
and Cct calls).
1
2
(See next page.)
4. OPERATION FROM PC
4-7