Dot1X Messages - Cisco IAD2424-8FXS - IAD 2424 Router System Message Manual

Chapter 2 Messages and Recovery Procedures
Error Message DHCP_SNOOPING-6-INTERFACE_NOT_VALID: Interface not valid. [dec]
bindings ignored.
Error Message DHCP_SNOOPING-6-LEASE_EXPIRED: Lease Expired. [dec] bindings ignored.
Error Message DHCP_SNOOPING-6-PARSE_FAILURE: Parsing failed for [dec] bindings.
Error Message DHCP_SNOOPING-6-VLAN_NOT_SUPPORTED: Vlan not supported. [dec] bindings
ignored.

DOT1X Messages

This section contains the 802.1x messages.
Error Message DOT1X-4-MEM_UNAVAIL: Memory was not available to perform the
802.1X action.
OL-9641-01
This message means that the specified number of bindings were ignored when the
Explanation
switch read the database file because the interface in binding database is not available, the interface
is a routed port, or the interface is a DHCP snooping-trusted Layer 2 interface. [dec] is the number
of bindings that the switch ignores.
No action is required.
Recommended Action
This message means that the specified number of bindings were ignored when the
Explanation
switch read the database file because the DHCP lease expired. [dec] is the number of bindings.
No action is required.
Recommended Action
This message means that the specified number of bindings were ignored when the
Explanation
switch read the database file because the database read operation failed. [dec] is the number of
bindings.
No action is required.
Recommended Action
This message means that the specified number of bindings were ignored when the
Explanation
switch read the database file because VLAN is no longer configured on the switch. [dec] is the
number of bindings that the switch ignores.
No action required.
Recommended Action
This message means that the system memory is not sufficient to perform the 802.1x
Explanation
authentication.
Reduce other system activity to reduce memory demands.
Recommended Action
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
DOT1X Messages
2-11