Cisco IAD2424-8FXS - IAD 2424 Router System Message Manual page 28

DHCP_SNOOPING Messages
Error Message BSPATCH-1-PATCHED: Boot Loader patch ([chars]) installed.
Error Message BSPATCH-3-FAILED: Failed to install Boot Loader patch ([chars]).
DHCP_SNOOPING Messages
This section contains the DHCP snooping messages.
Error Message DHCP_SNOOPING-3-DHCP_SNOOPING_INTERNAL_ERROR: DHCP Snooping internal
error, [chars].
Error Message DHCP_SNOOPING-4-AGENT_OPERATION_FAILED: DHCP snooping binding
transfer failed. [chars].
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
2-8
Explanation This message means that a boot loader patch is installed successfully. [chars] is the
SDRAM refresh timer register setting.
If this message recurs, copy it exactly as it appears on the console or in the
Recommended Action
system log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug
Toolkit to look for similar reported problems. If you still require assistance, open a case with the
TAC, or contact your Cisco technical support representative, and provide the representative with the
gathered information. For more information about these online tools and about contacting Cisco, see the
"Error Message Traceback Reports" section on page
This message means that the switch failed to apply a boot loader patch. [chars] is the
Explanation
SDRAM refresh timer register setting.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message means that a software sanity check failed in the DHCP snooping process.
Explanation
[chars] is the error.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
"Error Message Traceback Reports" section on page
This message means that the DHCP snooping binding transfer process failed because of
Explanation
the specified reason for failure. [chars] is the reason for failure.
No action is required.
Recommended Action
Chapter 2 Messages and Recovery Procedures
1-4.
1-4.
1-4.
"Error
OL-9641-01