Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message PM-4-BAD_VLAN_ID: an invalid vlan id ([dec]) was detected.
Explanation
VLAN ID.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Error Message PM-4-ERR_DISABLE: [chars] error detected on [chars], putting [chars]
in err-disable state.
Explanation
and placed the interface in an error-disabled state. A recovery is attempted after the configured retry
time (the default is 5 minutes). [chars] is the port where the threshold was exceeded. The first
[chars] is the error, and the second and third [chars] are the affected interfaces.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a
case with the TAC, or contact your Cisco technical support representative, and provide the
representative with the gathered information. For more information about these online tools and about
contacting Cisco, see the
Error Message PM-4-ERR_RECOVER: Attempting to recover from [chars] err-disable state
on [chars].
Explanation
taking it down to the error-disabled state. The first [chars] is the error, and the second [chars] is the
affected interface.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the
Error Message PM-4-EXT_VLAN_INUSE: VLAN [dec] currently in use by [chars].
Explanation
because the VLAN is being used by another feature. [dec] is the VLAN that is being used, and
[chars] is the feature that is using it.
Recommended Action
VLAN or to request another available VLAN.
OL-9641-01
This message means that the port manager detected an invalid request. [dec] is the
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
This message means that the port manager detected a misconfiguration or misbehavior
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
This message means that the port manager is attempting to bring the interface up after
Copy the message exactly as it appears on the console or in the system log.
"Error Message Traceback Reports" section on page
This message means that the port manager failed to allocate the VLAN for external use
Reconfigure the feature (for example, the routed port) to use another internal
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
PM Messages
1-4.
1-4.
1-4.
2-45
Advertisement
Table of Contents
