Table of Contents
Advertisement
DOT1X Messages
This section contains the 802.1X authorization messages.
DOT1X_MOD-3-NULLPTR: Unexpected null pointer in [chars] at [dec].
Explanation This message means that an internal software error occurred. [chars] is the software
filename, and [dec] is the line number in the file.
Response Find out more about the error by using the show tech-support privileged EXEC command and
by copying the error message exactly as it appears on the console or system log and entering it in the Output
Interpreter tool. Use the Bug Toolkit to look for similar reported problems. For more information about these
online tools , see the
"Error Message Traceback Reports" section on page
9.
DOT1X-3-ROUTEDPORT: Received vlan id ([dec]) from RADIUS for routed port [chars].
Explanation This message means that during 802.1X authorization, the RADIUS server provided a
VLAN ID for a routed port.
Response Remove the VLAN ID in the RADIUS configuration, or configure the port as an access port.
DOT1X-3-VLANINVALID: Received invalid vlan ([dec]) from RADIUS for [chars].
Explanation This message means that during 802.1X authorization, the RADIUS server provided a
VLAN ID that is not configured on the switch.
Response Change the VLAN ID in the RADIUS configuration, or configure the VLAN on the switch.
DOT1X-3-VLANMALFORMED: Received malformed vlan from RADIUS for [chars].
Explanation This message means that during 802.1X authorization, the RADIUS server provided an
invalid VLAN ID.
Response Correct the VLAN ID in the RADIUS configuration.
DOT1X-3-VOICEVLAN: Received voice vlan ([dec]) from RADIUS for [chars].
Explanation This message means that during 802.1X authorization, the RADIUS server provided a
VLAN ID that conflicts with the voice VLAN ID on the port.
Response Change the VLAN ID in the RADIUS configuration, or change the voice VLAN on the switch
port.
16
Cisco Systems Intelligent Gigabit Ethernet Switch Module for the IBM Eserver BladeCenter System Message Guide
Advertisement
Table of Contents
