Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message DOT1X-5-ERR_VLAN_INVALID: The VLAN [dec] is invalid and cannot be
assigned for use on the 802.1X port [chars] Vlan.
Explanation
use on this port. [dec] is the VLAN ID. [chars] is the port number.
Recommended Action
Error Message DOT1X-5-ERR_VLAN_NOT_ASSIGNABLE: RADIUS tried to assign a VLAN to
dot1x port [chars] whose VLAN cannot be assigned.
Explanation
a port whose VLAN cannot be changed, such as a routed port. [chars] is the port number.
Recommended Action
configuration command.
Error Message DOT1X-5-ERR_VLAN_NOT_FOUND: Attempt to assign non-existent [chars]
VLAN [chars] to dot1x port [chars].
Explanation
because the VLAN was not found in the VTP database. [chars] is the port number.
Recommended Action
Error Message DOT1X-5-ERR_VLAN_RESERVED: The VLAN [dec] is a reserved vlan and cannot
be assigned for use on the Dot1x port [chars] Vlan.
Explanation
assigned for use on this port. [dec] is the VLAN ID. [chars] is the port number.
Recommended Action
Error Message DOT1X-5-ERR_VLAN_RSPAN_CONFIGURED: VLAN [dec] is configured as a
Remote SPAN VLAN, which has Dot1x enabled interface(s) configured. Please disable
Dot1x on all ports in this VLAN or do not enable RSPAN on this VLAN.
Explanation
are configured with 802.1x enabled. [dec] is the VLAN ID.
Recommended Action
on all the ports in this VLAN.
Error Message DOT1X-5-INVALID_INPUT: Dot1x Interface parameter is Invalid on
interface [chars].
Explanation
is invalid. [chars] is the interface.
Recommended Action
OL-9641-01
This message means that the specified VLAN is out of range and cannot be assigned for
Update the configuration to use a valid VLAN.
This message means that the RADIUS server tried to assign a VLAN to a supplicant on
Change the specified port to a Layer 2 port by using the switchport interface
This message means that an attempt to assign a VLAN to a supplicant on a port fails
Make sure that the VLAN exists, or use another VLAN.
This message means that the VLAN specified is a reserved VLAN and cannot be
Update the configuration to not use this VLAN.
This message means that remote SPAN should not be enabled on a VLAN in which ports
Either disable the remote SPAN configuration on the VLAN, or disable 802.1x
This message means that the 802.1x interface parameter is out of the specified range or
See the CLI help by entering a ? after the command to see the valid range.
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
DOT1X Messages
2-15
Advertisement
Table of Contents
