Table of Contents
Advertisement
Chapter 2
Messages and Recovery Procedures
Error Message IDBMAN-3-NOTANAGGPORT: [chars]( [dec] / [dec] ) is not an aggregate
port.
Explanation
aggregate port to be used for aggregate port operations. [chars] is the interface name, and ([dec] /
[dec]) are the slot and port number (slot/port).
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message IDBMAN-3-PORTNOTINAGGPORT: [chars]([dec] / [dec]) is not present in
Aggport [chars [([dec] / [dec]).
Explanation
to be in an aggregate port was not. The first [chars] is the interface name, and the second [chars] is
the port-channel name. The ([dec] / [dec]) are the slot and port numbers (slot/port).
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message IDBMAN-3-VLANNOTSET: [chars]: Vlan [dec] not set since it already has
Vlan [dec].
Explanation
its VLAN set to the requested value. [chars] is the interface name. The first [dec] is the new VLAN
number, and the second [dec] is the currently assigned VLAN number.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Error Message IDBMAN-4-ACTIVEPORTSINAGGPORT: [chars]( [dec] / [dec] ) has [dec]
active ports, but is being removed.
Explanation
active ports to be removed. [chars] is the port-channel name, and the ([dec] / [dec]) are the slot and
port number (slot/port). The last [dec] is the number of currently active ports.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
OL-9641-01
This message means that there is an internal error that caused an interface that is not an
Copy the message exactly as it appears on the console or in the system log.
This message means that an internal error has been detected. A port that was supposed
Copy the message exactly as it appears on the console or in the system log.
This message means that there is an internal error that caused an interface to not have
Copy the message exactly as it appears on the console or in the system log.
This message means that there is an internal error that caused an aggregate port with
Copy the message exactly as it appears on the console or in the system log.
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
1-4.
1-4.
1-4.
IDBMAN Messages
"Error
"Error
"Error
2-29
Advertisement
Table of Contents
