Cisco IAD2424-8FXS - IAD 2424 Router System Message Manual page 37

Chapter 2 Messages and Recovery Procedures
Error Message EC-5-BUNDLE: Interface [chars] joined port-channel [chars].
Explanation
[chars] is the physical interface, and the second [chars] is the EtherChannel interface.
Recommended Action
Error Message EC-5-CANNOT_ALLOCATE_AGGREGATOR: Aggregator limit reached, cannot
allocate aggregator for group [dec].
Explanation
affected group.
Recommended Action
the same aggregator.
Error Message EC-5-CANNOT_BUNDLE1: Port-channel [chars] is down, port [chars] will
remain stand-alone.
Explanation
example, the port channel might be administratively disabled or disconnected. The physical
interface cannot join the bundle (EtherChannel) until the state of the port channel is up. The first
[chars] is the EtherChannel. The second [chars] is the port number.
Recommended Action
Error Message EC-5-CANNOT_BUNDLE2: [chars] is not compatible with [chars] and will
be suspended ([chars]).
Explanation
in the EtherChannel. For the interface to join the bundle (EtherChannel), change the interface
attributes to match the EtherChannel attributes. The first [chars] is the interface to be bundled, the
second [chars] is the physical interface (a switch port or a routed port) that is already in the bundle,
and the third [chars] is the reason for the incompatibility.
Recommended Action
Error Message EC-5-CANNOT_BUNDLE_LACP: [chars] is not compatible with aggregators in
channel [dec] and cannot attach to them ([chars]).
Explanation
ports within the port channel. For the port to join the bundle, change the port attributes so that they
match the port. [chars] is the incompatible port. [chars] is the short interface name, such as Gi0/1,
[dec] is the channel group number, and the last [chars] is the reason.
Recommended Action
OL-9641-01
This message means that the listed interface joined the specified EtherChannel. The first
No action is required.
This message means that a new aggregator cannot be allocated in the group. [dec] is the
Change the port attributes of the ports in the group so that they match and join
This message means that the state of the port channel (EtherChannel) is down, for
Ensure that the other ports in the bundle have the same configuration.
This message means that the interface has different interface attributes than other ports
Change the interface attributes to match the EtherChannel attributes.
This message means that the port has different port attributes than the port channel or
Match the port attributes to the port channel.
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
EC Messages
2-17