Cisco IAD2424-8FXS - IAD 2424 Router System Message Manual page 54

PIMSN Messages
PIMSN Messages
This section contains the PIMSN messages for the Protocol Independent Multicast (PIM) snooping
feature.
Error Message PIMSN-6-IGMPSN_GLOBAL: PIM Snooping global runtime mode [chars] due to
IGMP Snooping [chars].
Error Message PIMSN-6-IGMPSN_VLAN: PIM Snooping runtime mode on vlan [dec] [chars]
due to IGMP Snooping [chars].
PLATFORM Messages
This section contains low-level platform-specific messages.
Error Message PLATFORM-1-CRASHED: [chars].
Cisco ME 3400 and 2400 Ethernet Access Switch System Message Guide
2-34
This message means that IGMP snooping must be enabled for PIM snooping to run.
Explanation
When IGMP snooping is disabled, PIM snooping is disabled. When IGMP snooping is re-enabled,
PIM snooping is re-enabled. The first [chars] is the PIM snooping mode, and the second [chars] is
the IGMP snooping mode.
No action is required.
Recommended Action
This message means that IGMP snooping must be enabled for PIM snooping to run.
Explanation
When IGMP snooping is disabled, PIM snooping is disabled. When IGMP snooping is re-enabled,
PIM snooping is re-enabled. [dec] is the VLAN ID, the first [chars] is the PIM snooping mode, and
the second [chars] is the IGMP snooping mode.
No action is required.
Recommended Action
Explanation This message means that the system is attempting to display the failure message from
the previous failure. [chars] is the description of the error message.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
Chapter 2 Messages and Recovery Procedures
1-4.
"Error
OL-9641-01