Troubleshooting; Troubleshooting Flowchart; Ethernet Port Is Not Working After The Ethernet Cable Is Plugged In; Led Is Off For A Long Time - Ruijie RG-AP810-I Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
6

Troubleshooting

6.1

Troubleshooting Flowchart

6.2 Troubleshooting
6.2.1

Ethernet Port Is Not Working After the Ethernet Cable Is Plugged In

Verify that the device at the other end of the Ethernet cable is working properly. And then verify that the Ethernet
cable is capable of providing the required data rate and is properly connected.
6.2.2

LED Is Off for a Long Time


If you use a PoE power supply, verify that the power source is IEEE 802.11af-compliant, and then verify that
the cable is connected properly.

If you use a DC power source, verify that the mains input is abnormal, and then verify that the power supply
device works properly.
28
Appendix