Installing The Access Point; Installation Flowchart; Before You Begin - Ruijie RG-AP810-I Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
3

Installing the Access Point

The RG-AP810-I AP must be fixed and installed indoors.
Caution
Before installing the device, make sure you have carefully read the requirements described in Chapter 2.
3.1

Installation Flowchart

Preparation before installation
Check installation precautions
Install other modules
Connect cables or fibers
Bundle cables or fibers
Check after installation
3.2

Before You Begin

Before you install the device, verify that all the parts in the package contents are there and make sure that:

The installation position provides sufficient space for heat dissipation.

The installation position meets the temperature and humidity requirements of the device.

The power supply and required current are available in the installation position.

The Ethernet cable have been deployed in the installation position.

The selected power supply modules meet the system power requirements.

The position of the indoor emergency power switch is learned before installation. The power switch is cut off
Start
Install the device
End
16
Appendix