Ethernet/Ip Settings; Parameters - Omron sysmac EtherNet/IP NJ Series Connection Manual
Machine automation controller
Hide thumbs
Also See for sysmac EtherNet/IP NJ Series:
- Connection manual (68 pages) ,
- Connection manual (40 pages) ,
- Connection manual (46 pages)
Advertisement
6. EtherNet/IP Settings
This section describes the parameters, global variables, tag sets and connection settings that
are all defined in this guide.
6.1. Parameters
The following parameters are required to connect the Indicator and the Controller via
EtherNet/IP.
Controller settings
IP address
Subnet mask
Indicator settings
IP address
Subnet mask
Additional Information
For more information on the Indicator settings, refer to 7 EtherNet/IP interface of the FC400-
EIP OPERATION MANUAL (18AUG2021).
Setting item
Setting item
6．EtherNet/IP Settings
Controller port 1 (node 1)
192.168.250.1
255.255.255.0
Indocator (node 2)
192.168.250.2
255.255.255.0
8
Advertisement
Need help?
Do you have a question about the sysmac EtherNet/IP NJ Series and is the answer not in the manual?