How To Connect Using The Bluetooth Le Connection - Magtek DynaFlex User Manual

2 - How to Connect to Devices Using DynaFlex Utility
2.4

How to Connect Using the Bluetooth LE Connection

The following instructions are for pairing the DynaFlex II GO to a PC.
Launch the DynaFlex Utility to connect to the device by USB connection. Obtain Bluetooth LE
1)
Device name from selectin the
press the
Settings
Place the device into Pairing Mode by pressing and holding the power button on device until 4 beeps
2)
and release the button. The 4th LED will blink green.
On the PC, open Settings
3)
turned ON . On the right panel, choose
DynaFlex, DynaProx| Utility | User Manual (Windows)
Settings tab,
button for Device Name.
Get
and choose Bluetooth & other devices
Add Bluetooth or other device
Page 15 of 80 (D998200402-704)
WIRELESS / BLE menu, and at
. Make sure the "Bluetooth" is
Bluetooth LE
.