Magtek DynaFlex User Manual page 59

10 - How to use the NFC Demo
4) Edit the value of the Sector and then press the
Details for modifying a Sector/Block
•
Each Sector is composed of Blocks but are not shown as individual Blocks in this demo.
•
Block updating must be its full length i.e. 16 byte block has to be 16 bytes.
•
At Sector 0, Block 0 is reserved.
•
Sector blocks vary by card and within a card. Some Sectors hold 4 Blocks, some 16 Blocks.
•
The last Block of each Sector stores key data for accessing the Sector. It is best to not change
Block 3 or Block 15 during testing of the demo.
5) At the Output log, wait until the writing operation is completed with a single beep sound. Scroll up to
view the records written similar to as shown here.
DynaFlex, DynaProx| Utility | User Manual (Windows)
Update Sector Data
Page 59 of 80 (D998200402-704)
button.