Apple Vas Transaction - Magtek DynaFlex User Manual

5 - How to Use the Transaction Demo
5.2

Apple VAS Transaction

To perform an Apple VAS (value-added service) supported transaction, follow these steps.
1) Select the DEMO menu, select the desired
option.
2) Select a VAS mode from the
•
Single Mode
The device reads only VAS data from a tapped smartphone or reads EMV payment data from
a tapped card. When the device sends ARQC to conclude the transaction, it only includes
either EMV payment data in container FC for cards, or includes VAS data in FE container for
smartphones.
•
Dual Mode
The device reads both VAS data and EMV payment data from a tapped smartphone or reads
EMV payment data from a tapped card. When device sends ARQC to the host to conclude the
transaction, it includes EMV payment data in container FC and includes VAS data, if
available, in container FE.
•
VASOnly Mode
The device reads only VAS data from a tapped smartphone and does not read data from a
tapped card. If the tapped smartphone does not support VAS, the device does not detect or
read from the smartphone. When the device send ARQC to conclude the transaction, it
includes VAS data in container FE and does not include EMV payment data in container FC.
3) Press the
Start EMV Transaction
DynaFlex, DynaProx| Utility | User Manual (Windows)
Transaction Type
VASMode list.
button to start the transaction.
Page 23 of 80 (D998200402-704)
, and then select the Apple VAS