How To Connect Using The Wlan Connection - Magtek DynaFlex User Manual

2 - How to Connect to Devices Using DynaFlex Utility
2.3

How to Connect Using the WLAN Connection

Before connecting to WebSocket, please make sure the PC has all the root, and sub CA certificates and
the client private key certificate associated with the DynaFlex II PED device installed. Please refer to
document D998200550 DynaFlex II PED Using Wireless LAN Guide for more detail instructions. To
connect via Web Socket, follow these steps.
1) Launch the DynaFlex Utility and under the
[WEBSOCKET_Trust DynaFlex]
2) For non TLS connection, uncheck
ws://xxxxxxxx, and then press the green
3) For TLS connection, check
4) Browse to the client private key certificate, enter the certificate password, and press the green
Connect button.
5) The log will the show the device status as connected as shown below.
Output
DynaFlex, DynaProx| Utility | User Manual (Windows)
Device
.
Secure Connection
Connect
, enter the WebSocket address wss://xxxxxxxx
Secure Connection
Page 14 of 80 (D998200402-704)
list select the
[WEBSOCKET DynaFlex]
, enter the WebSocket address
button.
tor