Magtek DynaFlex User Manual page 55

10 - How to use the NFC Demo
2) When there is only one tag record present and its type is URI, the app will launch a browser to the
URI.
3) When there is more than one tag record, to navigate to a URL, right click a record and press on
as shown below.
Navigate Url
4) Additionally, when the
user event notification enable, the NFC tag can be read by tapping the tag without need of pressing
the Read NFC Tags
send the command to read NFC tag.
5) When the
End session after finish reading
the same NFC tag without need to remove it. The NFC is automatically turned off after the read.
When the
End session after finish reading
before a tag can be read again.
6) When reading a Mifare Classic tag, the Sectors will be shown similar as below.
DynaFlex, DynaProx| Utility | User Manual (Windows)
feature is checked-on and the device has the Contactless Card
Event-Driven
button. The app will receive a detection notification and then automatically
Page 55 of 80 (D998200402-704)
check box is enabled, the device can repeatedly read
check box is disabled, the NFC tag must be removed