Mifare Classic Tag - Write - Magtek DynaFlex User Manual

10 - How to use the NFC Demo

10.3 Mifare Classic Tag - Write

Writing to a Mifare Classic tag involves reading and writing data in small segments. Because of this, it is
important to have the tag be at rest during these operations. The usual quick tap is not sufficient. In this
section, "Present an NFC tag" means to bring the tag next to the device and leave it there.
1) To write to a Mifare Classic tag, select the tab, uncheck ,
NFC End session after finish reading
press the Read Tags button. Present a Mifare Classic tag and leave the tag next to the device.
2) Each sector of the Mifare Classic tag will be read.
3) Right-click on a Sector, and select .
Edit Value
DynaFlex, DynaProx| Utility | User Manual (Windows)
Page 58 of 80 (D998200402-704)