Nfc Type 2 Tag - Write - Magtek DynaFlex User Manual

10 - How to use the NFC Demo

10.2 NFC Type 2 Tag - Write

Writing to an NFC Type 2 tag involves reading and writing data in small segments. Because of this, it is
important to have the tag be at rest during these operations. The usual quick tap is not sufficient. In this
section, "Present an NFC tag" means to bring the tag next to the device and leave it there.
1) Select the tab, uncheck , press the button, and
NFC End session after finish reading Read Tags
then present an NFC Type 2 tag.
2) Select a , enter a , and then press the button.
Record Type Record Value Write
3) After the Write is complete, the Output will be shown as below.
DynaFlex, DynaProx| Utility | User Manual (Windows)
Page 56 of 80 (D998200402-704)