Viewing Etherlike Statistics - D-Link xStack DXS-3250E Web/Installation Manual

Viewing Etherlike Statistics

The Etherlike Statistics Page contains interface statistics. To view Etherlike Statistics:
1. Click Basic Setup > Interfaces Statistics > Etherlike. The Etherlike Statistics Page opens
Figure 253:Etherlike Statistics Page
The Etherlike Statistics Page contains the following fields:
•
Interface — Indicates the device for which statistics are displayed. The possible field values are:
–
Unit No. — Defines the specific unit number for which Etherlike statistics are displayed.
–
Port — Defines the specific port for which Etherlike statistics are displayed.
–
LAG — Defines the specific LAG for which Etherlike statistics are displayed.
•
Refresh Rate — Defines the amount of time that passes before the interface statistics are refreshed. The
possible field values are:
–
No Refresh—Indicates that the Etherlike statistics are not refreshed.
–
15 Sec—Indicates that the Etherlike statistics are refreshed every 15 seconds.
–
30 Sec—Indicates that the Etherlike statistics are refreshed every 30 seconds.
–
60 Sec—Indicates that the Etherlike statistics are refreshed every 60 seconds.
•
Frame Check Sequence (FCS) Errors — Displays the number of FCS errors received on the selected
interface.
•
Single Collision Frames — Displays the number of single collision frames received on the selected
interface.
•
Late Collisions — Displays the number of late collision frames received on the selected interface.
•
Excessive Collisions — Displays the number of excessive collisions received on the selected interface.
Page 361
Viewing Statistics
Viewing Interface Statistics