D-Link xStack DXS-3250E Web/Installation Manual page 213

DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide
Defining DHCP Relay Server
The DHCP Relay Server Page provides information for establishing a DHCP Configuration with multiple DHCP
servers to ensure redundancy. IP Addresses are controlled and distributed one-by-one to avoid storming the
device. To define DHCP Relay Server Information:
1. Click Basic Setup > IP Configuration > IP Addressing >DHCP Relay Server. The DHCP Relay Server
Page opens:
Figure 145:DHCP Relay Server Page
The DHCP Relay Server Page contains the following fields:
•
DHCP Relay — Enables DHCP Relay on the device. The possible field values are:
–
Enable — Enables DHCP Relay on the device.
–
Disable — Disables DHCP Relay on the device.
DHCP Relay Server Table
In addition to the field above, the following fields appear in the DHCP Relay Server Table:
•
DHCP Server — Displays the DHCP server's IP address.
•
Remove — Removes DHCP relay from an interface. The possible field values are:
–
Checked — Removes the selected DHCP Relay server.
–
Unchecked — Maintains the selected DHCP Relay server.
2. Define the field.
3. Click . The DHCP Relay Interfaces are saved, and the device is updated.
Page 212