Defining Lldp Med Port Settings - D-Link xStack DXS-3250E Web/Installation Manual

Defining LLDP MED Port Settings

The LLDP MED Port Settings Page contains parameters for assigning LLDP network policies to specific ports. To
configure LLDP MED port settings:
1. Click System > LLDP > LLDP MED Port Settings. The LLDP MED Port Settings Page opens:
Figure 220:LLDP MED Port Settings Page
The LLDP MED Port Settings Page contains the following fields:
To display LLDP MED Port Settings, select a Unit number:
•
Unit — Displays the stacking member for which the LLDP-MED port settings are displayed.
LLDP MED Port Settings Table
•
Port — Displays the port on which LLDP MED is enabled or disabled.
•
LLDP MED Status — Indicates if LLDP MED is enabled on the selected port. The possible field values are:
–
Enable — LLDP MED is enabled on the port.
–
Disable — LLDP MED is disabled on the port.
•
Network Policy — Displays the network policy advertised for the port.
•
Location — Displays the device location.
•
PoE — Indicates if the connected media is a PoE device. In addition, LLDP-MED provides information as to
how the device is powered, the device power priority, and how much power the device consumes. However
the information displayed depends if the device is a Power Sourcing Entity or a Powered Device.
Page 311
Configuring LLDP
Defining LLDP MED Port Settings