D-Link xStack DXS-3250E Web/Installation Manual page 299

DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide
•
Remove — Removes policies. The possible field values are:
–
Checked — Removes the selected policy.
–
Unchecked — Maintains policies.
To add a QoS Policy Profile:
1. Click Advanced Setup > Quality of Service > Policy Profiles > Policy. The Policy Page opens.
2. Click . The Add QoS Policy Profile Page opens:
Figure 212:Add QoS Policy Profile Page
In addition to the fields in the Policy Page, the Add QoS Policy Profile Page contains the following fields:
•
Class Map — Selects a class map for the class.
•
Action — Action assigned to incoming packets exceeding the CIR. This field is only relevant when the Police
Type value is Single.
–
Trust — The packets maintain their Cos and DSCP tags.
–
Set — Sets the packets' DSCP, Queue, or CoS tag to the value entered in the New Value field.
•
Police — Policer type for the class. Possible values are:
–
Aggregate — Configures the class to use a configured aggregate policer selected from the drop-down
menu. An aggregate policer is defined if the policer is shared with multiple classes. Traffic from two
different ports can be configured for policing purposes. An aggregate policer can be applied to multiple
classes in the same policy map, but cannot be used across different policy maps.
–
Single — Configures the class to use manually configured information rates and exceed actions.
•
Type — Selects the Policer type. Possible values are:
–
Aggregate — Configures the class to use a configured aggregate policer selected from the drop-down
menu. An aggregate policer is defined if the policer is shared with multiple classes. Traffic from two
different ports can be configured for policing purposes. An aggregate policer can be applied to multiple
classes in the same policy map, but cannot be used across different policy maps.
–
Single — Configures the class to use manually configured information rates and exceed actions.
Page 298