Dxs-3227P Front Panel - D-Link xStack DXS-3250E Web/Installation Manual

DXS-3227P Front Panel

The D-Link DXS-3227P is a 24 port Gigabit Ethernet Managed Switch. The device contains 24 gigabit network
ports and 4 SFP Ports on the front panel for network connectivity.
The following figure illustrates the DXS-3227P front panel.
Figure 4: DXS-3227P Front Panel
System Port
LEDs LEDs
D-Link
1 3 5 7 9 11 13 15 17 19 21 23
Li n k
S peed
PWR P25
P oE P ow er
FAN 26 2 4 6 8 10 12 14 16 18 20 22 24
FAULT 27
RPS MS
DX S-3227P
The device front panel is configured as follows:
•
24 Giga Ethernet ports — RJ-45 ports designated as 10/100/1000Base-T. The RJ-45 ports are designated
as ports Ports 1-48.
•
RS-232 Console port — An asynchronous serial console port supporting the RS-232 electrical specification.
The port is used to connect the device to the console managing the device.
•
Four SFP Ports — There are four SFP port, which contains 1000
•
One XFP Port — The 10 Gigabit Small Form Factor Pluggable (XFP) port provides protocol-independent
transmission and receiver functionality for 10Gbps Ethernet.
On the front panel there are the Port activity LEDs on each port with the system LEDs displayed separately.
1 3 5 7 9 11
2 4 6 8 10 12
A ct
1000 M
100 M
10 M
O f f
O n
Er r or
O ver l o ad
1000 Base-T Ports
Page 13
SFP
13 15 17 19 21 23
21
14 16 18 20 22 24
22
SFP
Base-X
(fiber) connections.
Device Description
Viewing the Device
23
25
24
XFP RS-232
Diagnostics Port
Port