Configuring An Initial Telnet Password; Configuring An Initial Ssh Password; Configuring An Initial Http Password; Configuring An Initial Https Password - D-Link xStack DXS-3250E Web/Installation Manual

DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide

Configuring an Initial Telnet Password

To configure an initial Telnet password, enter the following commands:
aaa authentication login default line
Console(config)#
aaa authentication enable default line
Console(config)#
line telnet
Console(config)#
Console(config-line)#
Console(config-line)#
Console(config-line)#
When initially logging onto a device through a Telnet session, enter bob at the password prompt.
When changing a device mode to enable, enter bob.

Configuring an Initial SSH password

To configure an initial SSH password, enter the following commands:
aaa authentication login default line
Console(config)#
aaa authentication enable default line
Console(config)#
line ssh
Console(config)#
Console(config-line)#
Console(config-line)#
Console(config-line)#
When initially logging onto a device through a SSH session, enter "jones" at the password prompt.
When changing a device mode to enable, enter "jones".

Configuring an Initial HTTP Password

To configure an initial HTTP password, enter the following commands:
ip http authentication local
Console(config)#
username admin password
Console(config)#

Configuring an initial HTTPS Password

To configure an initial HTTPS password, enter the following commands:
ip https authentication local
Console(config)#
username
Console(config)#
Enter the following commands once when configuring to use a console, a Telnet, or an SSH session in order to use an
HTTPS session.
In the Web browser enable SSL 2.0 or greater for the content of the page to appear.
Console(config)# ip https server
Console(config)# crypto certificate 1 generate key-generate
Generating RSA private key, 1024 bit long modulus
Console(config)# ip https certificate 1
When initially enabling an http or https session, enter admin for user name and user1 for password.
Note
HTTP and HTTPS services require level 15 access and connect directly to the configuration level access.
login authentication default
enable authentication default
password
bob
login authentication default
enable authentication default
password
jones
user1
password
admin user1
level
15
level
15
Page 42