Starting The D-Link Embedded Web Interface - D-Link xStack DXS-3250E Web/Installation Manual
Dxs/dws-3200 series layer 2+ stackable gigabit ethernet switches with optional xg uplinks
Hide thumbs
Also See for xStack DXS-3250E:
- Specifications (3 pages) ,
- Web/installation manual (311 pages)
Table of Contents
Advertisement
Starting the D-Link Embedded Web Interface
Notes
•
Disable the popup blocker before beginning device configuration using the EWS.
This section contains information on starting the D-Link Embedded Web interface. To access the D-Link user
interface:
1.
Open an Internet browser.
2.
Ensure that pop-up blockers are disabled. If pop-up blockers are enable, edit, add, and device information
messages may not open.
3.
Enter the device IP address in the address bar and press Enter. The Enter Network Password Page opens:
Figure 20: Enter Network Password Page
4.
Enter your user name and password.
Notes
•
The device is configured with a user name that is admin and a password that is blank, and can be
configured without entering a password.
•
Passwords are case sensitive.
•
To operate the device, disable all pop-ups with a popup blocker.
Starting the D-Link Embedded Web Interface
Page 49
Getting Started
- Quick Links:
- Dxs-3250E Front Panel
Hide quick links:
Advertisement
Table of Contents
