DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide
Configuring Domain Name Servers
Domain Name System (DNS) converts user-defined domain names into IP addresses. Each time a domain name
is assigned, the DNS service translates the name into a numeric IP address. For example, www.ipexample.com
is translated into 192.87.56.2. DNS servers maintain databases of domain names and their corresponding IP
addresses.
This section contains the following topics:
•
Defining DNS Servers
•
Defining DNS Host Mapping
Defining DNS Servers
The DNS Server Page contains fields for enabling and activating specific DNS servers. To enable a DNS server:
1.
Click Basic Setup > IP Configuration > Domain Name System > DNS Server. The DNS Server Page
opens:
Figure 150:DNS Server Page
The DNS Server Page contains the following fields:
•
Enable DNS — Enables translating the DNS names into IP addresses. The possible field values are:
–
Checked — Translates the domains into IP addresses.
–
Unchecked — Disables translating domains into IP addresses.
•
Default Domain Name — Specifies the user-defined DNS server name. Range is 1 to 158 characters.
•
Type — Displays the IP address type. The possible field values are:
–
Dynamic — The IP address is dynamically created.
–
Static — The IP address is a static IP address.
Page 218