Defining GVRP
GARP VLAN Registration Protocol (GVRP) is specifically provided for automatic distribution of VLAN membership
information among VLAN-aware bridges. GVRP allows VLAN-aware bridges to automatically learn VLANs to
bridge ports mapping, without having to individually configure each bridge and register VLAN membership. To
define GVRP on the device:
1.
Click Basic Setup > VLAN > GARP > GVRP Parameters. The GVRP Parameters Page opens:
Figure 117: GVRP Parameters Page
The GVRP Parameters Page is divided into port and LAG parameters. The field definitions are the same. The
GVRP Parameters Page contains the following fields:
•
Unit No./LAGs — Displays the stacking member for which the GVRP parameters are displayed or select
LAGs to configure LAGs.
•
GVRP Global Status — Indicates if GVRP is enabled on the device. The possible field values are:
–
Enable — Enables GVRP on the selected device.
–
Disable — Disables GVRP on the selected device.
GVRP Parameters Table
In addition to the fields above, the following fields appear in the GVRP Table:
•
Port/LAG — Displays the port or LAGs defined on a selected unit.
•
GVRP State— Indicates if GVRP is enabled on the interface. The possible field values are:
–
Enable — Enables GVRP on the selected interface.
–
Disable — Disables GVRP on the selected interface.
Page 183
Configuring VLANs
Configuring GARP