Dxs-3227 Front Panel - D-Link xStack DXS-3250E Web/Installation Manual

DXS-3227, DXS-3227P, DXS-3250 and DXS-3250E EWS User Guide
•
RS-232 Console port — An asynchronous serial console port supporting the RS-232 electrical specification.
The port is used to connect the device to the console managing the device.
•
Four SFP Ports — There are four SFP port, which contains 1000
On the front panel there are the Port activity LEDs on each port with the system LEDs displayed separately.
•
Two Power Connectors — Two AC power supplies interfaces.
•
An Optional Dual Module Slot - 10G Fiber XFP dual module.

DXS-3227 Front Panel

The D-Link DXS-3227 is a 24 port Gigabit Ethernet Managed Switch. The device contains 24 gigabit network ports
and 4 SFP Ports on the front panel for network connectivity.
The following figure illustrates the DXS-3227 front panel.
Figure 3: DXS-3227 Front Panel
System Port
LEDs LEDs
D-Link
1 3 5 7 9 11 13 15 17 19 21 23
PWR P25
FAN 26
FAULT 27
RPS MS
DX S-3227
2 4 6 8 10 12 14 16 18 20 22 24
The device front panel is configured as follows:
•
24 Giga Ethernet ports — RJ-45 ports designated as 10/100/1000Base-T. The RJ-45 ports are designated
as ports Ports 1-24.
•
RS-232 Console port — An asynchronous serial console port supporting the RS-232 electrical specification.
The port is used to connect the device to the console managing the device.
•
Four SFP Ports — There are four SFP port, which contains 1000
•
One XFP Port — The 10 Gigabit Small Form Factor Pluggable (XFP) port provides protocol-independent
transmission and receiver functionality for 10Gbps Ethernet.
On the front panel there are the Port activity LEDs on each port with the system LEDs displayed separately.
1 3 5 7 9
2 4 6 8 10
Li nk/
Act
Speed
1000 M
100 M
10 M
1000 Base-T Ports
Base-X
11 13 15 17 19 21
12 14 16 18 20 22
Base-X
Page 12
(fiber) connections.
SFP
23
24 21
23
25
24
22
XFP
SFP
Diagnostics Port
Port
(fiber) connections.
RS-232