E Auto Repeater; Eeee Es - Icom IC-2350H Instruction Manual

W Auto repeater
The U.S.A. version automatically activates the repeater
settings (DUP or DUP — and tone encoder ON/OFF) when
the operating frequency falls within the general repeater
output frequency range and deactivates them when outside
of the range.
@ Turn the power OFF.
(2) While pushing [SET], turn the power ON to enter INI-
TIAL SET mode.
;
© Push [SET] one or more times until "rPt" appears.
@ Rotate the VHF tuning dial to activate the auto repeater
function ("rPt-r1" or "rPt-r2") or cancel ("rPt-oF").
- "rPt-r1" and "rPt-r2" automatically set the duplex setting and
duplex/tone encoder settings, respectively.
© Push [POWER] for 2 sec. to turn the power OFF to exit
INITIAL SET mode.
Automatic
Automatic
Automatic
Tone encoder: Manual
Duplex setting:
INITIAL SET mode
145.200—145.495 MHz
146.610—-146.995 MHz
147.000—147.395 MHz
"DUP —" appears.
"DUP" appears.
447.000—449.995 MHz "DUP —" appears.
Mi Tone scan