Icom IC-2350H Instruction Manual page 57

13 mam
SPECIFICATIONS
W GENERAL e Output power and current drain:
e Frequency coverage
144 MHz
430(440) MHz
= 144-148 MHz 430—440 MHz
Y [Rx | 136-174 MHz* | 400-479 MHz" |
*! Guaranteed frequency coverage is 144-148 MHz. E RECEIVER
* Guaranteed frequency coverage is 430-440 MHz.
Tx | 144-148 MHz sa PL DAON
Usa ances :
144-148 MHz ert
Rx | 136-174 MHz*'
144-146 MHz 430—440 MHz
Asia
e Receive system : Double-conversion superheterodyne
e Mode -EM
e Intermediate frequencies
e Antenna impedance
-50Q (nominal)
144 MHz
1st 17.2 MHz 2nd 455 kHz
e Power supply requirement : 13.8 V DC + 15%
| 430(440) MHz
1st 30.85 MHz
2nd 455 kHz
e Usable temperature range :— 10°C to + 60°: +14 to+140F
e Sensitivity (for 12 dB SINAD): Less than 0.16 uV (typ.)
e Dimensions
-1140(W) x 40(H) x 204.5(D) mm
e Squelch sensitivity (at threshold): Less than 0.13 uV
e Spurious response : More than 60 dB
rejection ratio
E TRANSMITTER
e Audio output power : More than 2.4 W at 10% distortion
e Modulation system : Variable reactance frequency modu- l with the 8 Q internal speaker.
lation e Current drain :
e Max. frequency deviation : + 5.0 kHz Rated audio output on both bands 1.8A
e Spurious emissions : Less than — 60 dB Squelched on both bands 12A
e Microphone impedance :600Q
All stated specifications are subject to change without notice
or obligation.
52