Programmed Scan; Scan Resume Condition - Icom IC-2350H Instruction Manual

O
SCAN OPERATION
Scanning searches for transmitted signals automatically
and makes it easier to locate new stations for contact or
listening purposes.
FULL SCAN (p. 26)
Repeatedly scans all fre-
quencies over the entire
selected band. Used as a
simple default scan.
Repeatedly scans
memory channels within
the range of the set
memory area except skip
channels. Used for check-
ing often-called channels
and bypassing normally
busy channels such as
repeater frequencies.
Each band has 3 scan types and 5 resume conditions to
suit your needs.
PROGRAMMED SCAN
(p. 26)
Band
Mch Scan edges Mch Band
SCAN RESUME CONDITION
(p. 30)
Timer
scan
| Receiving |
a signal 4
2 sec.
Pausing
Pausing \
2se
Repeatedly scans be-
tween two user-
programmed frequencies.
Used for checking for fre-
quencies within a speci-
fied range such as
repeater output frequen-
cies, etc.
5 resume conditions are
available.
- Pause scan: When re-
ceiving a signal, pauses
until the signal disap-
pears.
-3 timer scans: When.
receiving a signal,
pauses for 5, 10 or 15
sec.
-Empty scan: "Pauses
until a signal appears.