A Aa Cas. Aut - Icom IC-2350H Instruction Manual

MEMORY AND CALL CHANNELS 6
Mi Programming without checking the overwriting channel
(2) Push [S.MW] to enter select memory write mode.
- The memory channel readout starts flashing.
(3) Rotate the selected band's tuning dial to select the
memory or call channel ("C") to be programmed.
® Push [S.MW-MW] again for 1 sec. to program.
-3 beeps may sound and the VFO contents (including the
subaudible tone frequency, etc.) are programmed.
- Memory channel number advances when continuously push-
ing [S.MW-MW] for 1 sec. after programming. (p. 23)
© Repeat )—@ to program another channel.
- Repeat and @ when next memory channel is selected at @.
[EXAMPLE]: Programming 145.875 MHz into memory channel 20.
V/MHz VFO mode
Set the
frequency.
Beep
S.MW MW Beep
Beep
Push for 1 sec.
to program.
Keep pushing for
1 sec., if desired.
A Select the
memory
channel.