Icom IC-2350H Instruction Manual page 34

8 SCAN OPERATION
The memory skip function speeds up the scan interval,
checking only desired memory channels. When first
applying power or after resetting the CPU, all memory
channels are specified as skip channels. Programming a
memory channel automatically cancels its skip setting. Set
memory channels to be skipped or scanned as follows.
The display shows that the VHF
memory channel 10 is set as a
skip channel.
@ Push the desired band's tuning dial.
®© Select the desired memory channel:
-Select memory mode by pushing the selected band's
[M/CALL] once or twice.
- Rotate the selected band's tuning dial to select the memory
channel.
@) Push [SET] one or more times until "CHS" appears as
shown above. `
- Pushing [S.MW] reverses the order of selection. (p. 48)
- Cancel pager or code squelch in advance. (pgs. 37, 38)
DRP#MAS\CJ[