Group Calls; Error Information - Icom IC-2350H Instruction Manual

PERSONAL CALLS
This display appears when
you are called with your ID
code and the calling sta-
tion's ID code is 263.
GROUP CALLS
This display appears when
you are called with the
group code, 123, and 123
has been programmed into
code channel 5.
ERROR INFORMATION
When the transceiver re-
ceives an incomplete signal,
"E" appears.
PAGER AND CODE SQUELCH 12
W Code squelch operation
@) Push the desired band's tuning dial.
(2) Set a frequency for code squelch operation.
(3) Push [DTMF] twice to turn the code squelch ON.
- "C" appears in place of the 100 MHz digit as shown below.
- An optional tone squelch can be used together with the code
squelch. (p. 39)
MAIN ]
"C" appears in place | rut cor
of the 100 MHz digi. Je TLUN Gras
rm
(is
@ Select the desired code channel:
- Push [SET].
e The code channel number flashes. If not, push [SET] or
[S.MW] several times.
- Rotate the selected band's tuning dial to select the code
channel.
- Push the tuning dial to exit the setting display.
not appear.