Icom IC-2350H Instruction Manual page 7

© VFO/MHz SWITCHES [V/MHz]
e Select VFO mode when a memory channel, call channel
or scratch pad memory is selected. (p. 11)
e Select the 1 MHz tuning step while in VFO mode is se-
~ lected. For some versions, select the 10 MHz tuning step
and 1 MHz tuning step. (p. 12)
© MEMORY/CALL CHANNEL SWITCHES [M/CALL]
Select memory mode or a call channel. (pgs. 19, 23)
© DUPLEX/TONE SWITCH [DUP*TONE]
e Selects simplex, "DUP-" or "DUP." (p. 16)
e Activates the subaudible tone encoder when pushed for
2 sec. (p. 16) |
e After installing an optional UT-89, alternately selects the
subaudible tone encoder, pocket beep and tone squelch
function when pushed for 2 sec. (pgs. 16, 39)
© LOW POWER/SCAN SWITCH [LOWeSCAN]
Had eres Alternately selects low power
when pusned
mo y 1, 2 and high power. (p.15)
eee Starts full scan or pro-
While in VFO mode grammed scan. (p. 26)
While in memory
Starts memory scan. (p. 28)
While the optional
Starts the tone scan func-
tone squelch is in use | tion. (p. 18)
When
pushed
and
| held
PANEL DESCRIPTION 1
[S.MWemMw]
© SET/LOCK SWITCH [SETeLOCk]
e Selects SET mode. (p. 48)
@ POWER SWITCH [POWER]