Download Print this page

Thermo Electric Element For Temperature Control - Getinge Applikon my-Control Hardware Manual

For minibio reactors 250, 500, 1000 ml

EXTERNAL ACTUATORS

5.2

THERMO ELECTRIC ELEMENT FOR TEMPERATURE CONTROL

The temperature in the 250 and 500 ml MiniBio reactor can be controlled by using the Thermo Electric

Heater / Cooler Assembly.

Specifications of the Thermo Electric Element:

Nominal power consumption:

Medium Heating Capacity:

Medium Cooling Capacity:

The control cable is connected to the rear of the my-Control.

Z311021211 Thermo Electric Heater/Cooler Assembly for MiniBio reactor 250ml (OD60)

Z311021221 Thermo Electric Heater/Cooler Assembly for MiniBio reactor 500ml (OD75)

• A Thermo Electric Element for the 1000 ml MiniBio Reactor is not yet available.

• For information concerning the Thermo Electric Condenser, refer to the section about Off-gas

Line Configuration.

80 W.

18 to 37 °C:

< 30 min.

37 to 30 °C:

< 19 min.

Hardware Manual my-Control MiniBio

Table of Contents

Do you have a question about the Applikon my-Control and is the answer not in the manual?

Save PDF