Receiving Faxes Manually: Manual Mode; Setting Manual Mode; Receiving A Fax Manually - Canon MULTIPASS C75 User Manual

Receiving Faxes Manually: MANUAL MODE

In MANUAL MODE, if you connect the handset, a telephone, or an extension phone to
your unit, you can receive voice calls as well as manually activate reception of faxes.
You can activate reception from your unit or from the telephone or extension phone
connected to the unit (this is called Remote receiving).
n
• For this mode, you need to connect the handset, a telephone, or an extension phone to
your unit. (1 p. 2-5)
• Make sure the REMOTE RX setting is enabled (1 p. 14-7). You can also enable this
setting from the MultiPASS Suite. (1 Software User's Guide)

Setting MANUAL MODE

Follow this procedure to set the receive mode to MANUAL MODE:
1
Press Receive Mode to select MANUAL
MODE.
• After a few seconds, the LCD changes to this
display:

Receiving a Fax Manually

Follow this procedure to receive a fax manually:
1
Make sure Manual is displayed in the LCD.
(1 above)
2
Make sure you have connected the
handset, a telephone, or an extension
phone to the unit. (1 p. 2-5)
3
When you hear the handset, telephone, or
extension phone ring, pick up the handset.
8-8
Receiving Faxes
MANUAL MODE
Ex:
15:00 Manual
Ex:
15:00 Manual
Chapter 8