Remove Access Cover; Attach Access Cover - CYBEX Arc Trainer 770A Service Manual

serious injury.
This is the minimum recommended service.
Press the Cybex logo icon
options.
Press the Access Toolbox icon to access the Toolbox login screen.
Enter the sequence:
Press the Statistics icon to access the Recorded Statistics screen.
Locate and tap the icon for Arc Trainer Totals.
Record Distance.
Exit Set Up Mode by
will refresh.
First 500 Miles (800 KM)
Remove access cover. (See previous procedure
Pull down and roll each belt to examine the condition. If a belt has cracks or appears worn, it
Attach access cover. (See previous procedure
Every 5000 Miles (8000 KM)
Move unit and vacuum underneath. Lift the rear of unit and roll it back from its present
position. Vacuum underneath and return unit to normal position.
Clean inside unit.
Remove access cover. (See previous procedure
Using a vacuum cleaner attachment or hand vacuum, clean the exposed components.
Remove dirt and debris from internal components.
Using a dry cloth, wipe all exposed areas.
Attach access cover. (See procedure
tapping the Toolbox
to display the Access Toolbox and Lock Screen
.
icon , then tap the Home icon
)
15
. The screen
)
)