Preventive Maintenance Activities - CYBEX Arc Trainer 770A Service Manual

Spray a clean cloth with a mild cleaning agent, such as a water and dish soap solution.
Wipe unit.
Do not spray cleaning solution directly on unit. Direct spraying could cause damage to electronics and
may void warranty.
After Each Use:
Wipe up any liquid spills immediately.
Wipe up any remaining perspiration from handles and painted surfaces.
Be careful not to spill or get excessive moisture on the console and display overlays, as this might
create an electrical hazard or cause failure of the electronics.
Clean heart rate grips using a cloth dampened with a cleaning solution containing alcohol.
The heart rate grips are the only part of the unit where a cleaning solution containing alcohol should
be used.
Perform regular preventive maintenance to ensure normal operation of unit. Keep a log of all
maintenance actions to assist in staying current with all preventive maintenance activities.
Cybex is not responsible for performing regular inspection and maintenance actions for your unit.
Instruct all personnel in equipment inspection and maintenance actions and also in accident reporting/
maintenance or service concerns.
Read and understand warnings listed in this chapter and in the
understand all instructions in this section.
During maintenance, disconnect the external power source. If unit has the optional AC Power Kit or
and E3 View power cord (E3 View units only) unplug the power cord(s) from the power outlet.
Tool Required
Phillips screwdriver
11
. Read and