Sharp MultiSync EA272Q User Manual page 17

nConnecting to a Computer with DisplayPort
• Please use a certified DisplayPort cable.
• It may take a moment for the signal to appear after turning on the computer.
• When connecting a DisplayPort cable to a component with a signal conversion adapter, an image may not appear.
• Some DisplayPort cables feature a locking function. When removing this cable, hold down the top button to release the lock.
• If the monitor's power is turned on after a connected computer is turned on, sometimes an image is not displayed. In this
case, please turn off the computer then turn it on again.
• Image inputs from DisplayPort input terminal outputs from the DisplayPort output terminal.
nConnecting to a Computer with USB Type-C (Upstream)
• When using the USB Type-C port for video / audio, please use a SuperSpeed USB cable with the USB compliance logo.
• HighSpeed USB (USB 2.0) cable or charging cable doesn't support video / audio transmission.
• When using the USB Type-C port for video / audio, please use a computer port that supports the DP Alt Mode.
• HDMI Alt Mode or MHL is not supported.
• When using computer battery charging (Power delivery), please use a computer and cable that support the USB Power
Delivery.
• It may take a few seconds for the monitor to recognize the USB signal. Do not disconnect or reconnect the USB cable while
the signal is being recognized.
• Before turning off the power switch of the monitor or turning off a connected computer, please turn off the USB function and
remove the USB device from the monitor. Data may be lost or corrupted if the USB device is not disconnected properly.
• Image inputs from USB Type-C (Upstream) port outputs from the DisplayPort output terminal.
• The monitor is not guaranteed to work with all USB devices sold commercially.
Parts name and Connecting Peripheral Equipment
English−17