ECO INFORMATION
n
ECO INFORMATION Menu
CARBON SAVINGS
CARBON USAGE
COST SAVINGS
CARBON CONVERT SETTING
CURRENCY SETTING
CURRENCY CONVERT
SETTING
INFORMATION
n
INFORMATION Menu
INFORMATION
nOSD Warning
OSD warning messages close by touching the MENU/EXIT key.
NO SIGNAL: This function gives a warning when there is no horizontal or vertical sync. After power is turned on or when there
is a change of input signal, the "NO SIGNAL" window will appear. See
OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power is turned
on, or there is a change of input signal, or if the video signal doesn't have proper timing, the "OUT OF RANGE" message will
appear.
USB functionality: This message gives a request to set [USB FUNCTIONALITY] setting. See
Remove USB-C cable: This function gives a warning when abnormal voltage is detected on USB Type-C port. Please refer to
"USB Type-C device does not work" in troubleshooting. See
Displays the estimated carbon savings information in kg.
Displays the estimated carbon usage information in kg. This is an arithmetic estimation, not actual
measurement value.
Displays the electricity cost savings in balance.
Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting is based on the
OECD data (2008 Edition).
Displays electricity pricing in 6 currency units.
Displays electricity savings in kW/hour (US Currency is default).
TIP:
The initial setting is US Dollar [$] in [CURRENCY SETTING] and $ [0.11] in [CURRENCY
CONVERT SETTING].
T his setting can be changed by using the [ECO INFORMATION] menu.
I f you want to use the French setting, please refer to the steps below:
1 . Touch the MENU/EXIT key and select the [ECO INFORMATION] menu using the
2 . Select the [CURRENCY SETTING] item by touching the
3 . The French currency unit is Euro [€]*. You can adjust currency setting to Euro icon [€] from
US Dollar [$] by touching the
4 . Select [CURRENCY CONVERT SETTING] by touching the
5 . Adjust [CURRENCY CONVERT SETTING] by touching the
* This initial Euro [€] setting is based on the OECD data for Germany (2007 Edition).
Please check the receipt of electricity prices for France or OECD data for France.
The French value according to the OECD data (2007 Edition) was €0.12. €
Provides information about the current input signal, the model, serial numbers and USB Type-C port's
status of your monitor.
or
key in [CURRENCY SETTING] item.
page
34.
page
40.
English−31
Menu Items
or
or
key.
or
key.
or
key.
page
28.
key.
Need help?
Do you have a question about the MultiSync EA272Q and is the answer not in the manual?
Questions and answers