Sharp MultiSync EA272Q User Manual page 27

TOOLS
n
TOOLS Menu
VOLUME
VIDEO DETECT
FIRST
NONE
DP OUT MULTISTREAM
CLONE
AUTO
OFF TIMER
POWER SAVE TIMER
LED BRIGHTNESS
DDC/CI
USB SETTING
Controls the volume of the speakers (EA272U only) or headphones.
To mute the sound output, touch the ECO/RESET key.
Selects the method of video detection.
When the current video input signal is not present, the monitor searches for a video signal from the other
video input ports. If the video signal is present in another port, the monitor switches the video source
input to the detected video source automatically. The monitor will not look for other video signals while the
current video source is present.
Video input signal detection is not enabled.
Selects the DisplayPort mode.

TIP: When the monitor has no image, refer to
page 33.
Sets SST (single-stream transport). Default is [CLONE].
Displays in SST (single-stream transport) or MST (multi-stream transport). [AUTO] should be selected
when using MST (multi-stream transport).*
If multiple monitors are set to [SST], an individual image is displayed at each monitor.
*: MST (multi-stream transport) and SST (single-stream transport) require the computer display adapter supports the feature. Please refer to
the user instructions for the computer or display adapter.
The monitor will automatically power off after a period of time has passed, which you can set.
Before powering off, a message will appear on the screen asking if you want to delay the turn off time by
60 minutes. Touch any OSD key to delay the power-down time.
Allows the monitor to turn off automatically after 2 consecutive hours in power save mode.
Adjusts the Power LED brightness.
Turns the [DDC/CI] function [ON] or [OFF].
Sets the transfer speed for the USB Type-C (Upstream) port.
USB2.0: The maximum transfer speed is equivalent to USB 2.0.
USB3.2: The maximum transfer speed is equivalent to USB 3.2.
TIP:
• To avoid data loss, before changing the setting, ensure that no USB flash drives are in use by
the operating system.

• In MST mode, OSD various settings (USB SETTING, DP VER, BIT RATE) or the computer may
be limited in the displaying of high resolutions or high reflesh rate.
"Using the DP OUT MULTISTREAM function" on
English−27
Menu Items