Controlling the Monitor with a computer (RS-232C) You can control this monitor from a computer via RS-232C Communication procedure (COM port) on the computer. This is the description when “Control Terminal” is set to ◼ Command format “RS-232C” and “Command Format” is set to “S-Format”. When a command is sent from the computer to the monitor, the monitor operates according to the received command and Computer connection...
Page 3
Controlling the Monitor with a computer (RS-232C) ◼ ◼ Response code format Communication interval • After “OK” or “ERR” is returned, you can send the When a command has been executed correctly following commands. Return code To set a timeout for the command response, specify 10 , 0A seconds or longer.
Page 4
Controlling the Monitor with a computer (RS-232C) RS-232C command table How to read the command table Command: Command field (See page 2.) W When the “Parameter” is set in the parameter field (see page 2), the command functions as described Direction: under “Control/Response Contents”.
Controlling the Monitor with a computer (LAN) Your monitor can be connected to a LAN allowing you to Command-based control control it from a computer on the LAN. This is the description when “Control Terminal” is set to You can control the monitor using RS-232C commands “LAN”...