Sharp MultiSync EA272Q User Manual page 28

Menu Items
TOOLS Menu
USB FUNCTIONALITY
AUTO
ON
90 W
OFF
USB LAN
USB SELECTION
FACTORY PRESET
Selects how power through the USB Type-A port and USB Type-C port, input signal from USB Type-C,
and external communication of USB are enabled in relation to the monitor's power status.

TIP: • Actual power consumption depends on the connected USB device even when the monitor's
power is off.

• To avoid data loss, before changing the setting, ensure that no USB flash drives are in use by
the operating system.

• When turning on the monitor for the first time or after FACTORY PRESET or [USB
FUNCTIONALITY] is set to [OFF], USB FUNCTIONALITY message is shown when a USB-C
cable is connected to the monitor. Please select a setting.
Works based on the monitor's current power state. Does not word when power is OFF.
Always working even when the monitor is in power save mode or power off.
Always working even when the monitor is in power save mode or power off.
Power delivery of the USB Type-C (Upstrem) Port is 90 W.
TIP:
• Power delivery of the USB Type-C (Downstrem) Port is limited 5V/0.9A.

• Sound output from speaker is disable (EA272U only).

• Brightness adjustment is limited 50 %.

• [DV MODE] is set to [Standard] automatically and cannot be changed.
All USB functions (include USB Type-C video signal) are disabled.
Turns the LAN terminal [ON] or [OFF].
When using the LAN terminal, set this [ON]. Please refer to
Change the USB upstream input (USB Type-B or USB Type-C) associated with the current display input.
When connecting a computer to each of the upstream ports, the monitor's USB downstream ports can be
used by selecting this setting for the current input signal.
You can change the active display and upstream USB port combination by using the INPUT/SELECT key
(see page 22).When using only one upstream port, the connected upstream port is used by default.
TIP:
To avoid data loss, before changing USB upstream ports, ensure that no USB flash drives are in
use by the operating system of the computer attached to the USB upstream port.
Selecting [FACTORY PRESET] allows you to reset all OSD control settings back to the factory settings
except [LANGUAGE], [HOT KEY] and [OSD LOCK OUT]. Individual settings can be reset by touching the
ECO/RESET key.
English−28
"Using the USB LAN function" on page 32.